Page 1 of 1
Quick Cobra clutch question.
Posted: Thu Mar 08, 2012 11:26 am
by bstocky
Say that five times fast.
Most people have the CC mounted to the left/outside and their dbl.pedal slave to the right/inside of the high-hat stand. I play my dbl.pedal slave on the outside of the HH. Does anyone know if the Cobra clutch can be set up to the right/inside of the high-hat stand?
Re: Quick Cobra clutch question.
Posted: Thu Mar 08, 2012 11:47 am
by Gavin Harrison
No it's not going to work. The CC has to be on the left of the Hi Hat stand.
Cheers
Gavin
Re: Quick Cobra clutch question.
Posted: Thu Mar 08, 2012 5:00 pm
by bstocky
Oh well. Thanks for the help.
Re: Quick Cobra clutch question.
Posted: Fri Sep 07, 2012 10:54 am
by bstocky
Does Gavin or anyone else know if it will work with a DW 9000 remote high-hat? I would play the CC to the left of the remote pedal.
http://www.dwdrums.com/hardware/9000/hardware.asp
Re: Quick Cobra clutch question.
Posted: Sat Jan 26, 2013 4:05 pm
by bstocky
Yes, I realize I'm talking to myself but just in case anyone else cares, it DOES work to the right/inside of the high-hat. My camera sucks but here are some pics.
This is the normal setup.
- cobra clutch 2013 018.jpg (272.07 KiB) Viewed 3726 times
and then I added a Tama Fast Clamp and a pipe from a junk high-hat. You put this little thing on the end of the pipe.
- cobra clutch 2013 013.jpg (340.28 KiB) Viewed 3726 times
- cobra clutch 2013 019.jpg (104.36 KiB) Viewed 3726 times
Any piece of hardware will work as long as it's the right diameter.
Re: Quick Cobra clutch question.
Posted: Sat Jan 26, 2013 4:09 pm
by bstocky
And then you get this. Works perfectly.
- cobra clutch 2013 009.jpg (163.49 KiB) Viewed 3726 times